Measurement Ways - Ranger 3DP4100 Operation Manual

5.3.2 Adjustment history reports
Printout Button

5.4 Measurement ways

5.4.1 Preparation before measurement
1. Operator need to start cameras on "preparation before measurement"
screen, also appear indication screen.
2. First, operator need to observe if the targets position and status are
correct on "preparation before measurement" screen.
3. Second, observe if the targets exposure values is in green color, the
software screen will indicate to adjust the exposure values if it is not
green.
4. Third, prepare according to the three steps indication on the screen.
close
键
33
按