Setting Windrower Tire Size; Checking Header Settings - MacDon M1240 Unloading And Assembly Instructions

Setting Windrower Tire Size

The Harvest Performance Tracker (HPT) is factory-set for 600/65R28 bar tires. If the windrower has a different
tire type, you need to change this setting. Setting the proper tire size is important for accurate tracking of ground
speed, acres, and productivity data.
1. Navigate to the SETTINGS menu with soft key 5 and
the HPT scroll knob. Refer to
Performance Tracker, page 79
2. Scroll to the WINDROWER SETTINGS icon (A) and
select it.
3. Scroll to the TIRES icon (B), and select it to display the
adjustment window.
NOTE:
The F3 shortcut button on the operator's
console will also display the WINDROWER
SETTINGS menu.
4. Scroll to highlight the appropriate tire size (A) and
select it. The new selection will be displayed with a
shaded green radio button.

Checking Header Settings

1. Navigate to SETTINGS menu with soft key 5 and
Harvest Performance Tracker (HPT) scroll knob. Refer
to Navigating the Harvest Performance Tracker, page
79 if required.
2. Scroll to SET-UP HEADER option (A) and select it.
3. Scroll to highlight appropriate item and select it.
4. Scroll to highlight appropriate option and select it.
• Example: If a draper header is attached, and
ATTACHMENTS (B) is selected, the available
choice is DOUBLE DRAPER DRIVE.
5. Scroll to highlight appropriate item and select it.
214056
PERFORMING PREDELIVERY CHECKS
Navigating the Harvest
if required.
82
Figure 5.26: Tire Size
Figure 5.27: Tire Selection
Figure 5.28: Header Settings
Revision A