Table of Contents
Advertisement
SPECIFICATIONS
10
HTGS Series
Accuracy
Selectable Units
Overload Capacity
Setpoints
Setpoint Output
Outputs
Memory
Auto Zero Reset
Sensitivity
Auto Power Off
Display Update
Data Processing Speed
Power
Battery Indicator
Battery Life
Operating Temp.
HTGS Ranges
Model
ozf-in/lbf-in
HTGS-4
70.00 (0.01 ozf-in)
HTGS-15 15.00 (0.01 lbf-in)
HTGS-40 40.00 (0.01 lbf-in)
HTGS-85 85.0 (0.1 lbf-in)
Specifications subject to change without notice.
Repair/Calibration
Go to www.imada.com and click on Repair/Calibration to get an
RGA number or call 800-373-9989 and send your gauge to
Imada, Inc. Suite 707, 3100 Dundee Rd., Northbrook, IL 60062 USA
page 30
± 0.5% F.S. ± 1 LSD
ozf-in, lbf-in, kgf-cm, N-cm, N-m
200% of F.S. Overload indicator flashes beyond 110% of F.S.
Programmable high/low setpoints with color-coded LED
indicators and output signal
–NG, OK, +NG, 2nd & 3rd setpoints
1st & 2nd Peaks
Overload
USB, RS-232C, Digimatic and ± 2 VDC analog output
Non-volatile, recall up to 1000 data
1.0 to 60 seconds (selectable)
Max, High, Medium, Low (selectable)
5, 10, minutes or OFF (selectable)
10/second
Actual 2,000 data/second through the USB port
Rechargeable Ni-MH battery pack or Imada ADW6010 adapter
Indicates three charge states high, medium and low
approx. 8 hours (recharge time approx. 10 hours)
32° to 100°F (0° to 40°C) 20~80% relative humidity
(Resolution) Accuracy: ±0.5% F.S. ±1 LSD
Capacity (Resolution)
kgf-cm
5.000 (0.001 kgf-cm)
20.00 (0.01 kgf-cm)
50.00 (0.01 kgf-cm)
100.0 (0.1 kgf-cm)
N-cm
50.00 (0.01 N-cm)
200.0 (0.1 N-cm)
500.0 (0.1 N-cm)
1000 (1 N-cm)
Advertisement
Table of Contents
