Imada HTGS-4 Instruction Manual page 18

8.Backward Compatible Command Table
(RS232C & USB communication)
CATEGORY COMMAND
D
Data Output
D[CR]
V
Data Output V[CR]
g
g[CR]
Y[CR]
Reset Z[CR]
M[CR]
B[CR]
C[CR]
Memory I
Memory
I[CR]
N[CR]
Unit
Unit K[CR]
O[CR]
Mode T[CR]
Mode
P[CR]
Comparator E
Setpoints E[HHHH][LLLL][CR]
page 18
DESCRIPTION
Data Output Request D[CR]
Data Output Request
+/– Peak Data Request V[CR]
+/– Peak Data Request
Continuous Data Output Request g[CR]
Continuous Data Output Request
Stop Continuous Data Output
Zero Reset (Tare and Peak Reset)
Save Data in Memory
Clear Last Memory
Clear All Memory
Download All Memory Data Request
Download All Memory Data Request
Switch Unit to N-m
Switch Unit to Kgf-cm
Switch Unit to Lbf-in(ozf-in)
Switch to Real time mode
Switch to Peak Mode
Set High/Low Comparator E[HHHH][LLLL][CR]
Set High/Low Setpoints
RESPONSE NOTES
FFFFF: Torque Data w/ Decimal Point
[±FFFFF][U][M][C][CR] U: Unit, K (Kgf-cm), N (N-m) or O (Lbf-in)
M: Mode, T (Real time), P (Peak)
[±FFFFF][U][M][C][CR]
C: Setpoints, H (High), O (OK)
P+[AAAAA][U][CR] AAAAA: +Peak Data w/ Decimal Point
P–[BBBBB][U][CR] BBBBB: –Peak Data w/ Decimal Point
R[CR]
[±FFFFF][U][M][C][CR] Same data format as
Same data format as D command response
[±FFFFF][U][M][C][CR] D command response
.
.
R[CR]
R[CR]
R[CR]
R[CR]
R[CR]
[±FFFFF][U][M][C][CR] Same data format as
[±FFFFF][U][M][C][CR] D command response
.
Same data format as D command response
.
.
END[CR]
R[CR]
R[CR]
R[CR]
R[CR]
R[CR]
R[CR] HHHH: High Setpoint w/o decimal
R[CR]
LLLL: Low Setpoint w/o decimal
H (Hold), M (Memory)
L (Low), E (Overload)
page 19