Imada HTGS-4 Instruction Manual page 36

REFERENCE SECTION — PROGRAM MENU
12
Display Functions
6
Display Format
Single Display displays torque value, unit, peak and
battery indicators.
Multi Display divides the screen into three sections.
Top section displays date, time, data storage, or +NG count.
Middle section displays unit and value.
Lower section displays peak, min/max, stored data, or high/low set-
points. See pages 32-33, Using Multi Display.
Select: Single or Multi
1. Turn ON the gauge, then press and hold
enter the Program Menu. Press the down arrow key, to highlight
Display Functions, then press the right arrow key to select.
2. Press the up/down arrow keys to highlight Display Format and
press the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
Brightness
Select bright or power save.
1. Follow Display Format step 1 , above.
2. Press the up/down arrow keys to highlight Brightness and press
the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
two seconds to exit. Or press the left arrow
two seconds to exit. Or press the left arrow
# Display Functions
MENU
two seconds to
MENU
#
appears, then press
MENU
to exit.
MENU
#
appears, then press
MENU
to exit.
4/6
Program Menu
Sound
>
Date and Time
to
to
page 37