Table of Contents
Advertisement
REFERENCE SECTION — MULTI DISPLAY
12
When memory number/value are highlighted, press (do not hold)
MENU
the
key and the data location number becomes highlighted.
ON/OFF
Press the up (
locations and values if more than one are stored. If no data is stored
'–' appears. Press the
Press (do not hold)
MENU
Press
again and high setpoint becomes highlighted. Press the
ON/OFF
up (
) or down (
MENU
Press
down arrow keys to change the value. Press the
Multi display highlighting must be off for proper gauge operation.
HIGH/LOW SETPOINTS
Selecting Single Display
Displays torque value, unit, and peak indicator.
ON/OFF
1. Press
2. Press and hold the
Program Menu.
3. Press the up (
light Display Functions then press the right arrow key to select.
4. Press the up or down arrow keys to highlight Display Format
then press the right arrow key (
4. Press the up or down arrow keys to select Single Display and
MENU
press the
5. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
) or down (
MENU
MEMORY NUMBER/VALUE
MENU
until high/low setpoints are highlighted.
ZERO
again to highlight the low setpoint and the up or
CHANGE HIGH SETPOINT
to turn ON the gauge.
MENU
ON/OFF
) or down (
key to input your selection.
two seconds to exit. Or press the left arrow
ZERO
) arrow keys to view other
key to highlight high/low setpoints.
NEXT STORED DATA
) arrow keys to change the value.
key two seconds to enter the
ZERO
PEAK
), to select.
MENU
MENU
key to exit.
CHANGE LOW SETPOINT
) arrow keys to high-
#
appears, then press
to exit.
2/2
page 33
Advertisement
Table of Contents
