Table of Contents
Advertisement
STORING AND COLLECTING DATA
7
During measurement in either Peak or Real Time mode, press
SEND
to store data. Up to 1,000 torque values may be stored in
memory.
Connect the gauge and a PC with the included USB cable. Press
SEND
and data is simultaneously stored in memory and transmitted
to the PC. Use included Force Logger (see page 20) or optional SW-1X
or other software to collect and display torque data.
1.Recalling Stored Data
ON/OFF
1. Press
2. Press and hold the
to enter the Program Menu.
3. Press the up or down arrow keys to highlight
Internal Memory, then press the right arrow
key.
4. Highlight Data Recall and press the right
arrow key.
5. Press the up or down arrow keys to view
stored data. If no data is stored '–' is displayed.
6. Press the left arrow key until the door icon
appears, then press and hold
seconds to exit. Or press the left arrow key
and when 'Exit Menu' appears, press
to exit.
page 10
to turn on the gauge.
MENU
key two seconds
MENU
#
<
{
<Back
#
two
MENU
Program Menu
Peak Functions
Internal Memory
>
Auto Zero Timer
Internal Memory
Data Recall
>
Data Delete
No.
23
}
6.0 N-m
Advertisement
Table of Contents
