Imada ESL-200C Instruction Manual

Led stroboscope

Download this manual

LIMITED WARRANTY

ONE-YEAR LIMITED WARRANTY AND LIMITATION OF LIABILITY: Hoto Instruments, for itself and

its related companies (hereinafter described collectively as "Hoto Instruments") warrants that all Hoto

Instruments products sold will be free of defects in materials and workmanship for a period of one (1)

year from date of delivery to end-user. The foregoing one (1) year warranty shall not be extended or

changed by Hoto Instruments furnishing any replacements, additions, attachments, adapters, batteries,

cables, accessories or repairs to the products subsequent to the date of delivery or acceptance. The forego-

ing warranty is the sole and exclusive warranty of Hoto Instruments regarding the products.

DISCLAIMER OF OTHER WARRANTIES: Other than the foregoing warranties, there are no express or

implied warranties or any affirmations of fact or promises by Hoto Instruments with respect to the prod-

ucts. Hoto Instruments disclaims any warranties, express, implied or statutory, not specifically set forth

above, including any implied warranties of merchantability and fitness for any particular purpose..

LIMITATION OF LIABILITY AND REMEDIES: Hoto Instruments' sole responsibility and liability

incurred as a result of the sale and/or use of the products, and the purchaser's exclusive remedy against

Hoto Instruments under any warranty shall be limited to the repair or replacement, at Hoto Instruments'

option, of product components not conforming to the warranty.

PURCHASER'S DAMAGES AND LIMITATIONS: In no event shall Hoto Instruments be liable to pur-

chaser, its assigns or agents, for economic loss, incidental or consequential damages, in contract or in tort,

including but not limited to, any damages for lost profits, down-time, lost production, failure to meet pur-

chaser's sales contracts, or defects in purchaser's material or workmanship. Hoto Instruments' limited

warranty is terminated in the event of product overload, shock load, misuse, negligence, accident, or if

repairs are attempted by the customer or third-parties without notice to and authorization by Hoto

Instruments.

INSTRUCTIONS FOR OBTAINING WARRANTY REPAIR OR REPLACEMENT: Please contact our cus-

tomer service department for a return authorization number. After you have obtained the authorization

number, please return the subject product to Hoto Instruments with all freight, duty and brokerage costs

prepaid.

1.800.544.2843

INSTRUCTION MANUAL

www.calcert.com

LED Stroboscope

Model ESL-200

sales@calcert.com

Page 1 ® LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY AND LIMITATION OF LIABILITY: Hoto Instruments, for itself and its related companies (hereinafter described collectively as “Hoto Instruments”) warrants that all Hoto Instruments products sold will be free of defects in materials and workmanship for a period of one (1) year from date of delivery to end-user.
Page 2 LED Stroboscope Model ESL-200 Range Resolution 12.0 – 9999.9 fpm/rpm ±0.1 fpm/rpm 10000 – 150000 fpm/rpm ±1 fpm/rpm Display flashes over 100000 rpm Introduction Model ESL-200 is an enhanced LED, battery operated, stroboscope Specifications designed to measure and observe rotating, reciprocating and linear motion in a large variety of production, quality control and academic Selectable Units: FPM or Hz...
Page 3 FLASH DURATION Changing Flash Duration (increasing sharpness) Flash duration is set at F0, which is suitable F0-F1 ...F9 for most applications. However, images can DISPLAY be sharpened by decreasing flash duration. LED INDICATOR 3000.0 ▲ ▼ After synchronizing the flash rate with the UP/DOWN ARROW KEYS ●...
Page 4 PREPARATION MEMORY (FPM and Hz units each have nine separate memory locations) –SEL– Changing Units (FPM is the factory default) Saving Flash Rates in Memory –FUL– Turn off the strobe (the strobe light goes off Turn on the strobe and synchronize the and the display stays on for two more minutes).

Esl-200