Internal Memory - Imada HTGS-4 Instruction Manual

REFERENCE SECTION — PROGRAM MENU
12
Auto Peak Memory Factory Default='OFF'
Sends peak value to memory when
1. Turn ON the gauge. Press and hold
the Program Menu. Press down arrow key, to highlight Peak
Functions then press the right arrow key, to select.
2. Press the up/down arrow keys to highlight Auto Peak Memory,
then press the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press

Internal Memory

3
Data Recall
Display up to 1,000 data from non-volatile memory.
1. Turn ON the gauge, then press and hold
enter the Program Menu. Press the down arrow key, to highlight
Internal Memory then press the right arrow key to select.
2. Data Recall is highlighted; press the right arrow key to select.
3. Press the up/down arrow keys to view stored data.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
Data Delete
Clear the last data or all data stored in memory.
1. Follow Data Recall step 1.
2. Press the up/down arrow keys to highlight Data Delete, then
press the right arrow key to select.
3a. Last Data Delete is displayed; press
3b.All Data Delete press the up/down arrow keys to display All
Data Delete; press
4. Follow Data Recall step 4 to exit the menu.
ZERO
two seconds to exit. Or press the left arrow
two seconds to exit. Or press the left arrow
MENU
to clear all data.
is pressed.
MENU
two seconds to enter
#
appears, then press
MENU
MENU
two seconds to
#
appears, then press
MENU
MENU
to clear the last data.
2/6
MENU
to
to exit.
Program Menu
Peak Functions
# Internal Memory >
Auto Zero Timer
to exit.
page 35