Table of Contents
Advertisement
6. External Zero (Same as
Connecting #25 (EX_ZERO) and #30 (GND) of the communications
port resets the torque display. (Tare, peak reset, or peak reset only
are dependent on the Zero/Tare Reset settings, see page 39).
7. External Send (same as the
Connecting #26 (EX_SEND) and #30 (GND) of the communications
port stores up to 1,000 data into gauge memory.
8. External Peak (same as
Connecting #27 (EX_PEAK) and #30 (GND) of the communications
port turns on peak mode.
Use contact closure only and DO NOT apply voltage
to #24 through #30 port pins.
ZERO
key function)
SEND
key function)
PEAK
key function)
page 13
Advertisement
Table of Contents
