Imada HTGS-4 Instruction Manual page 39

REFERENCE SECTION — SETUP MENU
12
Units
1
Select: ozf-in, lbf-in, kgf-cm, N-cm, N-m
1. Press and hold
to turn ON the gauge and enter the Setup
Menu. Units is highlighted, press the right arrow key to select.
2. Press the up or down arrow keys to highlight Torque Units and
press the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
+/– Indicator
2
Normal: clockwise (+) counterclockwise (–)
Reverse: clockwise (–) counterclockwise (+)
1. Press and hold
to turn ON the gauge and enter the Setup Menu. Press the down
arrow key, to highlight +/– Indicator, then press the right arrow
key to select.
2. Press the up/down arrow keys to select +/– Torque and press
the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
page 40
MENU
, then press
two seconds to exit. Or press the left arrow
MENU
, then press
two seconds to exit. Or press the left arrow
#
ON/OFF
#
appears, then press
MENU
to exit.
#
ON/OFF
#
appears, then press
MENU
to exit.
1/4
Setup Menu
Language
Units >
+/- Indicator
MENU
to
Setup Menu
Units
+/- Indicator >
Sensitivity
MENU
to