Imada HTGS-4 Instruction Manual page 40

REFERENCE SECTION — SETUP MENU
12
Sensitivity
3
Some applications may yield more consistent
results with less sensitivity.
Select: Max, High, Medium, Low
Factory Default='Max' (best for destructive tests)
1. Press and hold
gauge and enter the Setup Menu. Press the down arrow key to
highlight Sensitivity, then press the right arrow key to select.
2. Press the up/down arrow keys to select and press
input your selection.
3. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
Zero/Tare Reset
4
Select: All Reset or Peak Only
All Reset: zeroes and tares all values
Peak Only: zeroes the peak value without tare (see note below)
Factory Default='All Reset'
1. Press and hold
gauge and enter the Setup Menu. Press the down arrow key to
highlight Zero Tare Reset, then press the right arrow key to select.
2. Press the up/down arrow keys to select and press
input your selection.
3. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
Note:
All Reset: Press
Peak Only: Press
Press and hold
load or attachment.
MENU
, then press
two seconds to exit. Or press the left arrow
MENU
, then press
two seconds to exit. Or press the left arrow
ZERO
to tare any preload and zero the display.
ZERO
to zero the display without tare.
ZERO
for two seconds to zero the weight of a pre-
#
ON/OFF
to turn ON the
#
appears, then press
MENU
to exit.
#
ON/OFF
to turn ON the
#
appears, then press
MENU
to exit.
2/4
Setup Menu
+/- Indicator
Sensitivity >
Zero/Tare Reset
MENU
to
Setup Menu
Sensitivity
Zero/Tare Reset >
Send Functions
MENU
to
page 41