Table of Contents
Advertisement
REFERENCE SECTION — PROGRAM MENU
12
Auto Zero Timer
4
Automatically clears peak value.
Select: 1~60 seconds or OFF.
1. Turn ON the gauge. Press and hold
seconds to enter the Program Menu. Press down arrow key, to
highlight Auto Zero Timer, then press the right arrow key to select.
2. Press the up/down arrow keys to change the value and press
MENU
to input your selection.
3. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
Sound
5
Keypad Beep Factory Default='ON'
Beep confirms keys are pressed. Select: ON or OFF.
1. Turn ON the gauge, then press and hold
two seconds to enter the Program Menu. Press the down arrow
key, to highlight Sound, then press the right arrow key, to select.
2. Keypad Beep is highlighted; press the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
High/Low Alarm
Beeps when high setpoint is exceeded. Select: ON or OFF.
1. Follow Keypad Beep step 1, above.
2. Press the up/down arrow keys to highlight High/Low Alarm and
press the right arrow key to select.
3. Press the up/down arrow keys to select and press
input your selection.
4. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
page 36
Factory Default='OFF'
appears when set.
two seconds to exit. Or press the left arrow
two seconds to exit. Or press the left arrow
two seconds to exit. Or press the left arrow
MENU
two
#
appears, then press
MENU
MENU
#
appears, then press
MENU
#
appears, then press
MENU
3/6
Program Menu
Internal Memory
#
Auto Zero Timer
>
Sound
to exit.
Program Menu
Auto Zero Timer
#
Sound
>
Display Functions
MENU
to
to exit.
MENU
to
to exit.
Advertisement
Table of Contents
