Table of Contents
Advertisement
REFERENCE SECTION — SETUP MENU
12
Send Functions
5
Store current value(s) in memory when
pressed.
Select: Display Value, + Peak, – Peak, +/– Peak
1. Press and hold
gauge and enter the Setup Menu. Press the down arrow key to
highlight Send Functions, then press the right arrow key to
select.
2. Press the up/down arrow keys to select and press
input your selection.
3. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
Date Format
6
Select: YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY
1. Press and hold
gauge and enter the Setup Menu. Press the down arrow key to
highlight Date Format, then press the right arrow key to select.
2. Press the up/down arrow keys to select and press
input your selection.
3. Press the left arrow key until the door icon
MENU
and hold
key and when 'Exit Menu' appears, press
page 42
MENU
, then press
two seconds to exit. Or press the left arrow
MENU
, then press
two seconds to exit. Or press the left arrow
SEND
is
#
ON/OFF
to turn ON the
#
appears, then press
MENU
to exit.
#
ON/OFF
to turn ON the
#
appears, then press
MENU
to exit.
3/4
Setup Menu
Zero/Tare Reset
Send Functions
>
Date Format
MENU
to
Setup Menu
Send Functions
Date Format
>
Language
MENU
to
Advertisement
Table of Contents
