Table of Contents
Advertisement
7.Exporting Data
1. Click on CSV/Export to CSV in the menu bar. Click the SAVE but-
ton to select folder and filename. The Data Table is saved in CSV
format and can be imported into Microsoft Excel and Word.
* Data may not appear correctly in Microsoft Excel depending on
the Excel settings.
2. Adding to existing CSV file
Click File/Add to Existing CSV File in the menu bar and navigate
to a CSV file. The Data Table will be added to the right of the
existing data.
* New data cannot be added to an open file. Close the file in
which the data is to be added.
8.Acquisition Rate/Trigger Setup
Click on Data/Acquisition Rate in the
menu bar.
Select the desired acquisition rate from the
pop up window and click OK to exit.
Click on Data/Trigger Setup in the menu
bar. Enable triggers for torque (force) or
angle (displacement, if available) and set a
value. Click on OK to exit.
page 27
Advertisement
Table of Contents
