Using Multi Display - Imada HTGS-4 Instruction Manual

REFERENCE SECTION — MULTI DISPLAY
12

Using Multi Display

Multi Display (factory default) divides the screen into three sec-
tions: upper, middle and lower. Selectable data can be displayed in
the upper and lower sections. See the next page for Single Display.
Upper Section
count. Press the
lower section. See page 6 to change date and time.
DATE
Lower Section
ber and value, or high/low setpoints. Press the
PEAK
page 32
Turn on the gauge, then press (do not hold) the
MENU
key to highlight the upper section. Press
SEND
the left (
cycle date, time, stored data counter, or +NG
MENU
key to select the data and highlight the
TIME
After highlighting the upper section, press the
MENU
key and the lower section is highlighted.
Press the left (
keys to cycle peak, min/max, stored memory num-
MIN/MAX
TORQUE LEVEL BAR GRAPH
PEAK
) or right (
STORED DATA COUNTER
NUMBER OF DATA STORED IN
MEMORY
SEND
) or right (
MENU
MEMORY NUMBER/VALUE
1/2
) arrow keys to
+NG COUNT
NUMBER OF MEASUREMENTS
OVER HIGH SETPOINT
PEAK
) arrow
key to select.
HIGH/LOW SETPOINTS