Agilent Technologies ENA Series Installation And Quick Start Manual page 37

Step 5. In the Network Identification Wizard dialog box (1/2), select the
assumes the following user has logged on to this computer
is in the
2-16).
Figure 2-16 Network Identification Wizard dialog box (1/2)
Step 6. In the Network Identification Wizard dialog box (2/2), click the
initial registration of the E5061A/E5062A (Figure 2-17). Then, the measurement display of
theE5061A/E5062A appears.
Figure 2-17 Network Identification Wizard dialog box (2/2)
Chapter 2
User Name box. If not, type in
Initial Registration of E5061A/E5062A
Windows always
box and check that
agena . Finally, click the Next>
Finish
Installation
agena
button (Figure
button to finish the
37