Connecting The Battery; Operation - Toro Groundsmaster 4000 Series Installation Instructions Manual

11

Connecting the Battery

No Parts Required
Procedure
1. Connect the positive battery cable to the positive
battery post (Figure
over the terminal.
Figure 61
1. Battery
2. Connect the negative (black) battery cable.
3. Close the battery compartment cover
62) until it securely snaps shut.
Figure 62
1. Battery cover
61), and slip the rubber boot
(Figure

Operation

Controls
Note:
Check the operation of the lights. Make sure
that the correct lights are flashing when operating the
turn signal switch.
g020451
1. Light switch
Using the Lights
g351816
1. O
FF
2. Road lights O
1. Turn the key switch on and press the light switch
to the O
N
28
Figure 63
2. Turn signal switch
Figure 64
3. Road lights and optional
work light O
N
position.
g351549
g351478
N