Adjusting The Headlights - Toro Groundsmaster 4000 Series Installation Instructions Manual

2. Rotate the light switch
to the following positions:
•
O
FF
•
Road lights O
•
Road lights and optional work light O
Using the Turn Signal
•
Move the turn signal switch
signal a right turn.
•
Move the switch down to signal a left turn.
•
Move the switch to the middle position to shut off
the turn signals.
Using the Hazard Lights
Figure 65
1. Hazard switch
•
Press the top of the switch
hazard lights..
Note:
The hazard switch illuminates when
running the hazard lights.
•
Press the bottom of the switch to shut off the
hazard lights.
(Figure 63 and Figure
N
(Figure 63) up to
(Figure 65) to run the

Adjusting the Headlights

64)
1. Loosen the mounting locknuts and capscrews to
adjust the lights
N
1. Capscrew (horizontal light
adjustment)
2. Locknut (horizontal light
adjustment)
2. Adjust the lights per local standards.
3. Tighten the locknuts and capscrews
g351460
29
(Figure 62).
Figure 66
3. Locknut and capscrew
(vertical light adjustment)
(Figure
g351458
62).