Toro Groundsmaster 4000 Series Installation Instructions Manual page 26

Figure 56
1. 4-pin connector (labeled
LH Rear Lights—left
taillight harness)
2. Magnetic harness anchor
3. Adhere the magnetic harness anchor to the to
the frame rail (Figure
4. Route the 2-socket connector (license-plate light
branch) of the left taillight harness under the
hood and inboard
5. Insert the push-in anchor of the license-plate
light branch into the hole in the left hood-hinge
mount (Figure 57).
3. 2-socket connector
(license-plate light
branch—left taillight
harness)
56).
(Figure 56).
g351426
1. Push-in anchor
2. Hole (hood-hinge
mount—left)
6. At the inboard side of the frame rail, remove
g351444
the cap from the 4-socket connector labeled LH
R L
EAR IGHT
58).
1. 4-socket connector
(labeled LH R
L —machine wire
IGHT
harness)
2. Cap
26
Figure 57
3. 2-socket connector and
cap (license-plate light
branch—left taillight
harness)
of the machine wire harness
Figure 58
3. 4-pin connector (labeled
LH Rear Lights—left
EAR
taillight harness)
g351457
(Figure
g350866