Toro Groundsmaster 4000 Series Installation Instructions Manual page 10

Installing the Headlights and Light
Mounts
Machines with a Cab
1. Assemble the headlight and light mount to the
headlight bracket
capscrew (1/2 x 1 inch) and flange locknut (1/2
inch).
Figure 16
1. Flange-head capscrew
(1/2 x 1 inch)
2. Light mount
2. Torque locknut and capscrew and locknut to 91
to 113 N∙m (67 to 83 ft-lb).
3. Repeat steps 1 and
light mount at the other side of the machine.
4. Remove the cap from the 6-socket connector
labeled H
EADLIGHT
labeled H
EADLIGHT
harness, and plug the connector into the
headlight (Figure
(Figure 16) with a flange-head
3. Headlight bracket
4. Flange Locknut (1/2 inch)
2 for the other headlight and
LH or the 6-socket connector
RH of the machine wire
17).
1. 6-socket connector
(labeled H
EADLIGHT
H RH—machine
EADLIGHT
wire harness)
2. Cap
5. Repeat step
side of the machine.
g350533
10
Figure 17
3. Headlight
LH or
4 for the other headlight at the other
g350820