Toro Groundsmaster 4000 Series Installation Instructions Manual page 25

Figure 53
1. Locknut (1/4 inch)
2. Slow moving vehicle
mount
3. Slow moving vehicle
emblem
2. At each hood pivot bracket
the rearmost flange-head capscrew (3/8 x 1-1/4
inches).
Figure 54
1. Hood pivot bracket
3. Align the holes on the slow moving vehicle
mount with the slots in the hood pivot bracket
(Figure 55).
g351150
4. Washer (1/4 x 3/4 inch)
5. Capscrew (1/4 x 3/4 inch)
(Figure 54), remove
g351162
g351163
2. Flange-head capscrew
(3/8 x 1-1/4 inches)
1. Slow moving vehicle
mount
4. Assemble the slow moving vehicle mount to
the hood pivot bracket
flange-head capscrews (3/8 x 1-1/4 inches).
5. Torque the capscrews to 37 to 45 N∙m (27 to 33
ft-lb).
10
Connecting the Taillight
Harnesses
No Parts Required
Routing and Connecting the Left
Taillight
1. Unlatch and open the hood.
2. Route the 4-socket connector labeled LH R
L of the machine wire harness under the left
IGHT
frame rail and forward
25
Figure 55
2. Flange-head capscrew
(3/8 x 1-1/4 inches)
(Figure 55) with the 2
(Figure 56).
g351151
EAR