Toro Groundsmaster 4000 Series Installation Instructions Manual page 13

Figure 21
1. 12-pin connector (control
harness)
5. Assemble the steering cover to the cover mounts
with the 4 flange-head screws.
6. Pull the boot down and assemble the bottom of
it into the steering cover
Figure 22
g350970
2. Notch (steering cover)
(Figure 22).
g350967
Assembling the Fuse Mount Plate
1. Assemble the clip nut (#10) onto the fuse mount
plate (Figure 23).
1. Clip nut (#10)
2. Fuse mount plate
3. Flasher
2. Assemble the flasher to the mount plate
23) with a flange head screw (#10 x 3/8 inch).
3. Secure the flasher to the mount plate with a
cable tie (Figure
4. Plug the 12-socket connector of the console
harness into the 12-pin connector of the flasher
(Figure 24).
13
Figure 23
4. Flange head screw (#10 x
3/8 inch)
5. Cable tie
23).
g350763
(Figure