Toro Groundsmaster 4000 Series Installation Instructions Manual page 5

1. Reflector decal (yellow)
2. Remove the backing film from the yellow
reflector decal.
3. Align the reflector to the bottom edge of the
platform as shown in
the platform.
4. Wrap the edge of the reflector over the top of
the platform.
5. Repeat steps 1 through
reflector decal.
Installing the Front Reflector
Machines with a Cab
1. Clean the front cab pillar above the headlight
bracket with alcohol, and allow it to dry
5).
Figure 4
Figure 4, and adhere it to
4 for the other yellow
(Figure
g351079
1. Front cab pillar
2. Reflector decal (yellow)
2. Remove the backing film yellow reflector decal.
3. Align the decal 23.8 cm (9-3/8 inches) above
the headlight bracket, and adhere the decal to
the cab pillar
Installing the Rear Reflector
1. Clean the face of the bumper with alcohol, and
allow it to dry
2. Remove the backing film from the red reflector
decal.
3. Align the reflector to the bumper as shown in
Figure 6, and adhere it to the bumper.
5
Figure 5
3. 23.8 cm (9-3/8 inches)
4. Headlight bracket
(Figure 5).
(Figure 6).
Figure 6
g351129
g351117