Toro Groundsmaster 4000 Series Installation Instructions Manual page 24

Figure 51
1. Flange locknut (1/2 inch)
2. Washer (1/2 inch)
3. Capscrew (1/2 x 1-1/4
inches)
2. Insert 2 carriage bolts (1/4 x 1-1/4 inches) into
the slots in the swivel-adapter mount
3. Assemble the swivel-adapter mount and bumper
to the left frame rail with the 2 capscrews (1/2 x
1-1/4 inches), 2 washers (1/2 inch), and 2 flange
locknuts (1/2 inch) that you removed in step 1.
4. Torque the capscrews and locknuts to 91 to 113
N∙m (67 to 83 ft-lb).
5. Install the pivot bracket to the carriage bolts
in the swivel-adapter mount
flange locknuts (3/8 inch).
g350534
4. Carriage bolt (1/4 x 1-1/4
inches)
5. Swivel-adapter mount
(Figure 48).
(Figure 52) with 2
1. Carriage bolt (3/8 x 1-1/4
inches)
2. Pivot bracket
6. Repeat steps
mount at the other side of the bumper.
9
Installing the Slow-Moving
Vehicle Sign
Parts needed for this procedure:
1 Slow moving vehicle emblem
1 Slow moving vehicle mount
3 Capscrew (1/4 x 3/4 inch)
3 Washer (1/4 x 3/4 inch)
3 Locknut (1/4 inch)
Procedure
1. Assemble the slow moving vehicle emblem to
the slow moving vehicle mount
3 capscrews (1/4 x 3/4 inch), 3 washers (1/4 x
3/4 inch), and 3 locknuts (1/4 inch).
24
Figure 52
3. Flange locknut (3/8 inch)
1 through 4 for the swivel-adapter
(Figure
g350605
53) with