Toro Groundsmaster 4000 Series Installation Instructions Manual page 20

Figure 41
1. Electrical cover
2. Socket-head screw
Inserting the Fuses
Insert the fuses (Figure
fuse-block slots:
Fuse
10 A
15 A
Figure 42
1. Fuse (10 A) and fuse-block
slot A3
3. Clip nut
(electrical-component
mount)
42) into the following
Fuse-block slot
A3
A4
2. Fuse (15 A) and fuse-block
slot A4
Installing the Electrical Cover
Machines with a Roll Bar
1. Align holes in the controller cover with clip nuts
on the electrical-component mount
g351105
1. Electrical cover
2. Socket-head screw
g351092
2. Install the controller cover to the
electrical-component mount
with the 2 socket-head screws and 2 washers
that you removed in
Cover (page
Installing the Electrical Cover
Machines with a Cab
1. Align holes in the controller cover with clip nuts
on the electrical-component mount
1. Electrical cover
g351014
2. Socket-head screw
2. Install the controller cover to the
electrical-component mount
20
(Figure
Figure 43
3. Washer
4. Clip nut
(electrical-component
mount)
(Figure
Removing the Electrical
19).
(Figure
Figure 44
3. Clip nut
(electrical-component
mount)
(Figure
43).
g351093
43)
44).
g351092
44)