Adjusting The Zoom Position; About The Zoom Speed - Panasonic HC-X2 Operating Instructions Manual

Using the zoom function – Adjusting the zoom position

Adjusting the zoom position

≥About the zoom speed: 169

≥Using i.ZOOM: 170
≥Using fast zoom: 170
The zoom can be operated at the following 3 locations:
•
Zoom lever (on the handle)
•
Zoom lever (on the grip)
•
Zoom ring
(A) Zoom lever (on the handle)/(B) Zoom lever (on the grip)
<T>: Zoom in the image.
<W>: Zoom out the image.
(C) Zoom ring
A side: Zoom out the image.
B side: Zoom in the image.
•
In the [ZOOM RING] menu, you can also change the turn direction for the zoom ring and change the zoom control.
( [ZOOM RING]: 80)
(D) Zoom ratio
•
The zoom ratio can be confirmed between [Z00]/[iZ00] (maximum wide angle) to [Z99]/[iZ99] (maximum telephoto) on the
screen display. The value becomes higher as the unit zooms in and smaller as the unit zooms out.
About the zoom speed
•
The zoom speed changes with the amount that the zoom lever (on the grip) is pushed or the speed that the zoom ring is
turned.
•
The zoom is at a steady rate with the zoom lever (on the handle).
Performs the zoom operation with the speed set in the [CAMERA] menu
•
If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded. When returning the
zoom lever to the original position, move it quietly.
•
The units for the zoom ratio can be changed in the [ZOOM/FOCUS] menu. (
(A)
(B)
(C)
(D)
Z00
A
A
B B
[SW MODE]
[ZOOM/FOCUS]:
169
[H.ZOOM SPEED].
104)