Menu – [VIDEO OUT/LCD/VF] menu
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1]
[2]
[OFF]
(Factory setting: [2])
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
≥[4:3], [13:9], [14:9], [16:9], [17:9], [1.85:1], [2.35:1], [OFF]
(Factory setting: [OFF])
[FOCUS ASSIST]
[FOCUS ASSIST SW]
Sets how focus assist is set when the <FOCUS ASSIST> button is pressed or [FOCUS ASSIST] in the USER button is set.
[EXPAND]
[PEAKING]
[EXPAND&PEAKING]
(Factory setting: [EXPAND&PEAKING])
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC]
[HOLD]
[UNTIL REC]
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
≥[×2], [×3], [×4]
(Factory setting: [×2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
≥[LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
≥[RED], [GREEN], [WHITE]
(Factory setting: [RED])
[DETAIL]
Sets the intensity of the contour for the video to make it easier to focus.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[DETAIL LEVEL]
Sets the intensity of the contours.
The items that can be set are as follows.
≥[−3]...[+3]
(Factory setting: [0])
Box
Corners
Does not display.
Sets the enlarged display.
Sets the peaking display.
Sets both [EXPAND] and [PEAKING].
Disables the enlarged display function after 10 seconds have elapsed.
Enables the enlarged display function until either the USER button assigned to [FOCUS ASSIST] is pressed
again or the USER button icon is touched again.
Enables the enlarged display function until performing recording operation.
106