Format That Can Be Output From The Sdi Out Terminal [X2] - Panasonic HC-X2 Operating Instructions Manual

Output format – Format that can be output from the SDI OUT terminal [X2]

Format that can be output from the SDI OUT terminal [X2]

The format that can be output from the <SDI OUT> terminal differs with following combination of the settings.
•
[SYSTEM] menu [FREQUENCY]
•
[SYSTEM] menu [REC FORMAT]
•
[VIDEO OUT/LCD/VF] menu
Set to the following settings in the menus when outputting only to the <
•
[VIDEO OUT/LCD/VF] menu
•
[VIDEO OUT/LCD/VF] menu
It is also possible to output to both the <SDI OUT> terminal and the <HDMI> terminal. (
the SDI OUT terminal and the HDMI terminal [X2]:
When the [FREQUENCY] is set to [59.94Hz]
[REC FORMAT]
Resolution
3840×2160 59.94p
29.97p
23.98p
1920×1080 59.94p
59.94i
29.97p
23.98p
1280×720 59.94p
When the [FREQUENCY] is set to [50.00Hz]
[REC FORMAT]
Resolution
3840×2160 50.00p
25.00p
1920×1080 50.00p
50.00i
25.00p
1280×720 50.00p
* Factory setting
•
The 3840×2160 output is not supported.
•
User bits are not displayed.
•
[SDI OUT FORMAT] restores the factory settings when the settings of [FREQUENCY] and [REC FORMAT] change and the
current setting values of [SDI OUT FORMAT] cannot be acquired.
•
The output format when playing back from the thumbnail screen is as follows.
– It will be the value set in [SDI OUT FORMAT] when the recording resolution of the playback clip is the same as [REC
FORMAT].
– It will be factory setting of [SDI OUT FORMAT] when the recording resolution of the playback clip is different from [REC
FORMAT].
•
There may be a fews seconds of images not displayed on the external device when the clips are changing over, etc.
[VIDEO OUT SEL] [SDI OUT FORMAT]
[VIDEO OUT SEL] [SDI + HDMI OUTPUT]
[VIDEO OUT SEL] [EXTERNAL OUT SEL]
242)
Frame rate
[1920×1080p]: 1920×1080/59.94p 4:2:2 10 bit
[1920×1080i]
[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit
[1920×1080PsF]
[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit
[1920×1080PsF]
[1920×1080p]: 1920×1080/59.94p 4:2:2 10 bit
[1920×1080i]
[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit
[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit
[1920×1080PsF]
[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit
[1920×1080PsF]
[1280×720p]: 1280×720/59.94p 4:2:2 10 bit
Frame rate
[1920×1080p]: 1920×1080/50.00p 4:2:2 10 bit
[1920×1080i]
[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit
[1920×1080PsF]
[1920×1080p]: 1920×1080/50.00p 4:2:2 10 bit
[1920×1080i]
[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit
[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit
[1920×1080PsF]
[1280×720p]: 1280×720/50.00p 4:2:2 10 bit
SDI OUT
[OFF]
[SDI]
[SDI OUT FORMAT]: Output Format
*
: 1920×1080/59.94i 4:2:2 10 bit
*
: 1920×1080/29.97PsF 4:2:2 10 bit
*
: 1920×1080/23.98PsF 4:2:2 10 bit
*
: 1920×1080/59.94i 4:2:2 10 bit
*
: 1920×1080/29.97PsF 4:2:2 10 bit
*
: 1920×1080/23.98PsF 4:2:2 10 bit
[SDI OUT FORMAT]: Output Format
*
: 1920×1080/50.00i 4:2:2 10 bit
*
: 1920×1080/25.00PsF 4:2:2 10 bit
*
: 1920×1080/50.00i 4:2:2 10 bit
*
: 1920×1080/25.00PsF 4:2:2 10 bit
239
> terminal.
Note regarding simultaneous output to