Basic Setting Of The Camera - Panasonic HC-X2 Operating Instructions Manual

Network Connection – Streaming function

Basic setting of the camera

Specifying the network settings
Specify the network settings. (
Settings for the streaming function
1
Set the [SYSTEM] menu
Set to the FHD (1920×1080) recording format.
2
Select the [NETWORK] menu
Streaming function is enabled.
3
Select the protocol with the [NETWORK] menu
PROTOCOL].
4
In the [NETWORK] menu
when streaming.
•
For details about the setting items (
5
Set the setting corresponding to the selected protocol. (
and starting the streaming:
•
The streaming function can be used when all of the following conditions are satisfied.
– The [SCENE FILE] menu
– The [SYSTEM] menu
– The menu has been set according to "Settings when using the streaming function" (This cannot be used when set to
UHD) ( Settings when using the streaming function:
– Interval recording, background recording, and dual codec recording
* Available for setting when using
(For the )
•
When the [SCENE FILE] menu
dynamic range to standard dynamic range.
•
When the [SCENE FILE] menu
V-709.
Network settings: 271)
[FREQUENCY]/[REC FORMAT].
[NETWORK FUNC]
[STREAMING]
Settings when using the streaming function:
283)
[VFR] [OFF] is set
[SUPER SLOW] [OFF] is set
.
[GAMMA MODE SEL] is set to [HLG], video is streamed after converting from high
[GAMMA MODE SEL] is set to [V-Log], video is streamed after converting from V-Log to
[STREAMING].
[STREAMING]
[STREAMING FORMAT], set the format
282)
*
are disabled
281
[STREAMING
282)
Setting for each protocol