Table of Contents
Advertisement
Menu – [NETWORK] menu
[RTSP SETTING]
[LISTEN PORT]
Sets the port number to wait for the RTSP command.
(Factory setting: [554])
[MULTICAST]
Enables/disables the multicast function.
The items that can be selected are as follows.
≥
[ENABLE], [DISABLE]
(Factory setting: [DISABLE])
[MULTICAST ADDRESS]
Sets the address when using the streaming with the multicast.
(Factory setting: [239.192.0.20])
[MULTICAST PORT]
Sets the port number when using the streaming with the multicast.
(Factory setting: [37004])
[TTL/HOP LIMIT]
Sets the TTL/HOP limit value for the multicast.
The items that can be selected are as follows.
≥
[1]...[254]
(Factory setting: [16])
[LOAD (SD CARD)]
Loads the settings file from the memory card and reflects in the menu when [CONNECTION INFO.] is set to [MEMORY].
The items that can be selected are as follows.
≥[YES], [NO]
[SAVE (SD CARD)]
Encrypts and saves the information of the destination URL to the memory card.
The items that can be selected are as follows.
≥[YES], [NO]
[CLEAR (MEMORY)]
Clears the contents of the streaming setting set in the menu item.
The items that can be selected are as follows.
≥[YES], [NO]
[START]
Starts streaming.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[WLAN PROPERTY]
Performs settings related to the wireless LAN.
[TYPE]
Sets the connection method to the wireless LAN.
[DIRECT]
[INFRA(SELECT)]
[INFRA(MANUAL)]
(Factory setting: [DIRECT])
It can connect directly without using a wireless access point to a device equipped with
wireless LAN such as a tablet terminal.
Connects to the wireless access point. The access point is selected from the list.
Connects to the wireless access point. Wireless access point is entered manually.
114
Advertisement
Table of Contents
