Table of Contents
Advertisement
Menu – [SCENE FILE] menu
[B.GAMMA RANGE]
Sets the maximum level of compression/expansion.
[1]
[2]
[3]
[KNEE SETTING]
[KNEE MODE]
To avoid overexposure, select the compression level of the high intensity video signals received through the image sensor.
[AUTO]
[MANUAL]
[OFF]
[KNEE POINT]
Sets the knee point position in 0.5 % steps.
The items that can be set are as follows.
≥[70.0%]...[107.0%]
[KNEE SLOPE]
Sets the knee inclination.
The items that can be set are as follows.
≥[0]...[99]
[HLG KNEE SW]
Enables/disables the operation of knee for HLG.
The items that can be set are as follows.
≥[ON], [OFF]
•
Can be set when [SCENE FILE] menu
[HLG KNEE POINT]
Sets the position of the knee point for HLG.
The items that can be set are as follows.
≥[55]...[100]
•
Can be set when [SCENE FILE] menu
[HLG KNEE SLOPE]
Sets the inclination of knee for HLG.
The items that can be set are as follows.
≥[0]...[100]
•
Can be set when [SCENE FILE] menu
[WHITE CLIP SETTING]
Sets so that the brightest parts of the video signal cannot exceed a certain level.
[WHITE CLIP]
Switches the white clip function [ON]/[OFF]. The [WHITE CLIP LEVEL] setting value is enabled when [ON].
The items that can be set are as follows.
≥[ON], [OFF]
[WHITE CLIP LEVEL]
Sets the white clip level.
The items that can be set are as follows.
≥[90%]...[109%]
Around 20 %
Around 30 %
Around 40 %
Sets up automatically depending on the signal from the image sensor.
The [KNEE POINT], [KNEE SLOPE] settings are applied.
Disables the Knee function.
[GAMMA MODE SEL] is set to [HLG].
[GAMMA MODE SEL] is set to [HLG].
[GAMMA MODE SEL] is set to [HLG].
92
Advertisement
Table of Contents
