Table of Contents
Advertisement
Menu – [RECORDING] menu
[DF/NDF]
Sets the count method for the time code generator.
Enabled only when the frame rate of the [SYSTEM] menu
[DF]
[NDF]
(Factory setting: [DF])
•
The setting is fixed to [NDF] when the [RECORDING] menu
[UB MODE]
Selects the user bits mode. User bits information is recorded in the clip.
[FRAME RATE]
[USER]
[TIME]
[DATE]
[TC]
[CLIP NAME]
(Factory setting: [USER])
[TC IN/OUT SEL]
Sets the input/output of the <TC IN/OUT> terminal.
[TC IN]
[TC OUT]
(Factory setting: [TC IN])
[TC OUT REF]
Sets the output delay of the time code that is output from the <TC IN/OUT> terminal.
[RECORDING]
[SDI OUT]
(Factory setting: [RECORDING])
[REC COUNTER]
Sets operation of the counter for recording.
[TOTAL]
[CLIP]
(Factory setting: [TOTAL])
[TIME STAMP]
Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the
[DATE FORMAT] setting.
[OFF]
[DATE]
[TIME]
[DATE&TIME]
(Factory setting: [OFF])
Uses the drop frame mode.
Uses the non-drop frame mode.
Selects the image information (such as frame rate) of the camera.
Selects the user bits set in [UB PRESET].
Selects the local time. (hh, mm, ss)
Selects the local date and time. (YY, MM, DD, hh)
Records the time code value as user bits.
CAM INDEX (1 character) and CARD COUNT (3-digit number) are each recorded as
values converted to ASCII character codes.
Only enabled when the [SYSTEM] menu
Sets to the time code input.
Sets to the time code output.
Outputs the recording time code without delay. This is used when performing
simultaneous recording on two cameras with the time code of this camera as the
master.
Matches to output image from the <SDI OUT> terminal. Outputs without delay when
video is not output from the <SDI OUT> terminal.
The count continues cumulatively until you press the <RESET> button.
Clears the counter value at the start of recording and counts the time for each recording.
Does not superimpose the date and time.
Superimposes only the date.
Superimposes only the time.
Superimposes the date and time.
[REC FORMAT] is set to 59.94i/59.94p/29.97p.
[REC FUNCTION]
[REC MODE]
111
[INTERVAL] is set.
[FILE FORMAT]
[MOV] or [MP4] is set.
Advertisement
Table of Contents
