Table of Contents
Advertisement
Screen status display – Mode check display
For the
Item
[VIDEO OUT]
[CARD STATUS]
AUDIO screen
Displays the audio input/output settings and the audio level meter.
Item
[AUDIO]
[AUDIO OUT]
[SELECT]
[LINE/MIC]
[LEVEL]
[LIMITER]
[LOWCUT]
Audio level meter
[VIDEO OUT FORMAT]
[VIDEO OUT CHAR]
—
[TOTAL]
[SLOT1]
[SLOT2]
[CH1]/[CH2]
[CH1]/[CH2]
[CH1]/[CH2]
[CH1]/[CH2]
[CH1]/[CH2]
Displays with [3840×2160p]/[3840×2160p(420/8bit)]/[1920×1080p]/
[1920×1080i]/[1280×720p]/[720×480p]/[720×576p] the signals output through
the <HDMI> terminal.
Displays with [ON]/[OFF] whether the characters output through the <HDMI>
terminal are superimposed.
Displays the status, remaining recording capacity, and the total capacity of
the memory card inserted in the card slot.
The status of the memory card that is displayed are following types.
[NO CARD]:
Memory card is not inserted.
[UNSUPPORTED]:
Memory card is not supported.
[FORMAT ERROR]:
Memory card cannot be used. (Format error)
[PROTECTED]:
It is write protected. (The write-protection switch of the memory card is set to
the LOCK side)
[NO REMAIN]:
There is no remaining recording capacity.
[NOT SDXC]:
SDXC memory card is not inserted in the MOV recording/MP4 recording.
Cases other than above:
The remaining recording capacity is displayed in 0 % through 100 %.
Displays the remaining recording capacity/total capacity of the memory cards
in the card slot 1 and the card slot 2.
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 1.
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 2.
Displays with [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX] the audio channel
format output from the headphone jack and the built-in speaker.
Displays the audio recorded to each channel with [INT(L)]/[INT(R)]/[INPUT1]/
[INPUT2].
Displays the audio input signal for each channel with [LINE]/[MIC]/
[MIC+48V].
When either [INT(L)] or [INT(R)] is selected as the recorded audio, [---] is
displayed.
Displays the adjustment method of the recording level of the audio for each
channel with [AUTO]/[MANU].
Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when the adjustment method of the recording level of the audio
is set to [AUTO].
Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
Enlarges the display of the audio level meter displayed on the camera image
screen.
258
Description
Description
Advertisement
Table of Contents
