Connecting To The Ac Outlet - Panasonic HC-X2 Operating Instructions Manual

Preparations before recording – Power supply

Connecting to the AC outlet

It is possible to use this unit with power supplied from the AC outlet by turning on the unit with the AC adaptor connected.
1
Connect the AC cable to the AC adaptor and the AC outlet.
Insert the plugs as far as they will go.
(3)
(1)
(2)
2
Connect the AC adaptor to the <DC IN 12V> terminal.
•
Make sure to set the power switch to <OFF> and the status indicator is turned off when disconnecting the AC adaptor.
( Turning the unit on/off:
•
Even when you use the AC adaptor for recording images, keep the battery connected. This allows you to continue the
recording even if a power failure occurs or the AC adaptor is unplugged from the AC outlet by accident.
•
The AC adaptor is in the standby condition when the mains plug is connected. The primary circuit is always "live" as long as
the mains plug is connected to an electrical outlet.
41)
35