Supplying The Time Code Externally [X2] - Panasonic HC-X2 Operating Instructions Manual

Settings before recording – Setting of time data

Supplying the time code externally [X2]

The time code output from the camera corresponding to the camera video or the playback video can be supplied to
an external recording device.
(A)
(C)
(A) <SDI OUT> terminal
(B) SDI IN terminal
(C) <TC IN/OUT> terminal
(D) TC IN terminal
(E) VTR, etc.
1
Select the [RECORDING] menu
2
Select the [RECORDING] menu
The same time code can be recorded to the video of the same time on two devices.
To match the time code output from the <TC IN/OUT> terminal to the video of the SDI
output or the monitor output
1
Select the [RECORDING] menu
•
TCR is output during playback. TCG output during playback is not supported.
•
The time code output may shift by 1 frame when the frame rate of [REC FORMAT] is set to 23.98p.
•
Output of user bits is not supported.
(B)
(E)
(D)
[TC/UB]
[TC/UB]
[TC/UB]
[TC IN/OUT SEL]
[TC OUT REF]
[TC OUT REF]
64
[TC OUT].
[RECORDING].
[SDI OUT].