Table of Contents
Advertisement
Special recording function – IR recording
IR recording
A night time shooting using the IR light (commercially-available) can be performed.
Assigning [IR REC] to the USER button
1
Select the [CAMERA] menu
Set so enable/disable of the IR recording can be switched with a USER button.
Performing IR recording
1
Press the USER button to which [IR REC] is assigned or touch the USER button icon.
The unit will enter the IR recording mode.
•
The following happens in the IR recording mode:
– [IR] is displayed on the camera image screen.
– Iris is automatically adjusted.
2
Press the REC button.
IR recording is started.
•
In the following case, this cannot be set.
– When using the face detection/tracking AE&AF function
– (For the
)
When the [SCENE FILE] menu
•
This can also be set with the [CAMERA] menu
•
It is recommended to use a tripod.
•
It takes longer to focus with auto focus in dark locations.
•
You can record a clear image by positioning the center area of the screen over the subject.
•
Focus values may not be displayed correctly in IR recording mode.
•
It is also possible to change the color in which images are recorded in [IR REC COLOR]. (
[USER SW]
[GAMMA MODE SEL]
[V-Log] is set
[SW MODE]
203
[USER1] to [USER14]
[IR REC].
[IR REC COLOR]:
[IR REC].
83)
Advertisement
Table of Contents
