Table of Contents
Advertisement
Jumper and Switches
Jumper and Switches
This section describes the jumper and DIP switch functions.
shows the jumper and switch locations.
Figure 2-2. Jumper and Switch Locations
Audio Input Selection Jumper (JP1)
The audio input jack (
nel of the AD1881A codec (
and 3 and pins 2 and 4,
jumper connects pins 3 and 5 and pins 4 and 6,
2-6
www.BDTIC.com/ADI
) can connect to the
J4
). When the
U13
connects to the mono
J4
ADSP-21160 EZ-KIT Lite Evaluation System Manual
Figure 2-2
or
input chan-
MIC1
LINE_IN
jumper connects pins 1
JP1
channel. When the
MIC1
connects to the stereo
J4
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-21160 EZ-KIT Lite and is the answer not in the manual?