Adsp-21160 Ez-Kit Lite Hardware - Analog Devices ADSP-21160 EZ-KIT Lite Manual

2 ADSP-21160 EZ-KIT LITE
HARDWARE
This chapter describes the hardware design of the ADSP-21160 EZ-KIT
Lite board. The following topics are covered.
• "System Architecture" on page 2-2
Describes the configuration of the ADSP-21160 EZ-KIT Lite
board and explains how the board components interface with the
processor.
• "Jumper and Switches" on page 2-6
Shows the location and describes the function of the on-board
jumper and DIP switch.
• "LEDs and Push Buttons" on page 2-8
Shows the location and describes the function of the LEDs and
push buttons.
• "Connectors" on page 2-11
Shows the location and gives the part number for the on-board
connectors. Also, the manufacturer and part number information is
given for the mating parts.
• "Specifications" on page 2-16
Provides the board's measurements and power supply
specifications.
ADSP-21160 EZ-KIT Lite Evaluation System Manual
www.BDTIC.com/ADI
2-1