Table of Contents
Advertisement
Connectors
Expansion Connectors (P1–3)
Three board-to-board connectors provide signals for most of the proces-
sor's peripheral interfaces. Analog Devices does not populate the
expansion connectors or provide any additional support for the interface.
See
"Expansion Interface" on page 2-4
expansion interface. Contact Samtec for the availability and pricing of the
connectors. For the exact pinout of the connectors, refer to
EZ-KIT Lite Schematic" on page
Part Description
90-position 0.05" spacing (
90-position 0.05" spacing (through hole)
90-position 0.05" spacing (surface mount)
90-position 0.05" spacing (low cost)
Power Connector (P4)
The power connector (
the EZ-KIT Lite board.
Part Description
2.5 mm power jack (
7.0V power supply
2-12
www.BDTIC.com/ADI
B-1.
,
,
)
P1
P2
P3
Mating Connectors
) provides all of the power necessary to operate
P4
)
P4
Mating Power Supply (shipped with EZ-KIT Lite)
ADSP-21160 EZ-KIT Lite Evaluation System Manual
for more information on the
Manufacturer
Part Number
SAMTEC
SFM-145-01-S-D
SAMTEC
TFM-145-x1 series
SAMTEC
TFM-145-x2 series
SAMTEC
TFC-145 series
Manufacturer
Part Number
SWITCHCRAFT
RAPC712X
DIGI-KEY
RAPC712X-ND
GLOBTEK
TR9CC2000LCP-Y
"ADSP-21160
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-21160 EZ-KIT Lite and is the answer not in the manual?