Toshiba STRATA DK24 Manual page 439

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
PROGRAM 50-4 .-
LCR LONG DISTANCE INFORMATION (LDI) PLAN NUMBER
7-l
SELECT = 4
DATA = LDI Route Plan (1 - 8)
Identify the LDI Route Plan
by entering 1 - 8.
NOTES:
LDI Plan Number:
0
(1
-8)
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns LDI Plan Number 8.
3. Typically, LDI Plan Number = Local Call Plan Number.
PROGRAM 50-5
LCR LOCAL CALL PLAN NUMBER
SELECT = 5
DATA = Local Route Plan (1 - 8)
Identify the Local Route Plan
by entering 1 - 8.
NOTES:
Local Call Plan Number:
0
(1
-8)
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns plan 8 to be the local call plan.
3. The local plan handles special codes and operator calls.
PROGRAM 50-6
LCR DIAL ZERO TIMEOUT
7-T
SELECT = 6
DATA = Timeout Value
Enter a timeout value from
04 - IO seconds long.
NOTES:
Dial Zero Timeout:
I7
(04 - IO seconds)
1. For more information, see the instructions preceding the record sheets.
I
2. Initialized data assigns an LCR Dial Zero Timeout value of 06.
3. This value determines pause time before sending a call on to an operator, etc.
2-l 40