Toshiba STRATA DK24 Manual page 369

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECOROS
SECTION 200-096-302
FEBRUARY1991
PROGRAM29-4
DIGITALOSSANDDSSCONSOLEKEYASSIGNMENTS
.
SELECT = 2
DSS Number l-4:
Each system can have up to 4
No. 01 - No. 20
consoles. Enter the console to which
Press the LED/key that
station access code to the
keys are being assigned (DSS console 2).
is in the same position
as the console key being
key chosen. See code
DSS Key Group l-3:
assigned. The LED
table below for the keys
Each console has three groups
lights and the LCD
to enter. See Notes 4 and 5.
of 20 L EDs/keys. Choose
displays the console
the group to be assigned. key's number.
Console 4
I
Code Table
1 Nf3TF.q.
I
Key Type
Code
.-. --.
1.
I
For more information, see the instructions preceding the record sheets.
^ , . .
1 Station Speed Dial 1 *IO - *49 1
1 DSS (Station Access) 1 #00 - #95 1
I
92
I
2. miuallzeu uata assoaates the PEKU or PDKU'S console with the telephone
connected to PEKU or PDKU's firstport. See Program 28 to reassign consoles
to other telephones.
3. When assigning CO line access keys (0 I - 36), the associated telephone must
be assigned access to the CO line also. See Program 40.
4. Them andm keys may be changed tom, m arm keys, but they may not
be reassigned to other key locations.
5. Initialized data assigns
q
(Code 89) to Group No. 3 key 19 andm (Code 91)
to Group No. 3 key 20 on all consoles. All other keys are initialized as DSS keys
to ports 00 - 57, in sequential order.
6. Initialized key assignments are shown after Program 29.
7. Important: Onlyprogramm,
q
, m,
q
, andm buttons;programming other
feature buttons on a console may cause system operation problems.
I
I
2-69