Toshiba STRATA DK24 Manual page 365

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM28
DSSCONSOLE/ATTENDANTELECTRONlCTELEPHONEASSlGNMENTSAND _
DlGlTALDSSCONSOLE/ATTENDANTDlGlTALTELEPHONEASSlGNMENTS
p-j-p--p-pqp-j-p-j~rpT-p-j-~
7 SELECT= (l-4) &ATT (1 4)
= -
Enter the DSS
Enter the attendant electronic or digital
console number. telephone number. See Notes 4 and 5.
See Note 3.
DSS PEKU/ DSS/DDSS
DDSS PDKU PCBs Console
(Lowest Slot to Highest)
Number
Attendant Electronic/
Digital Telephone
Number
(1,2,3 or4)
Low Slot Number:
1
Slot Number: 2
Slot Number:
' High Slot Number:
3
4
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. A digital DDSS console can be assigned to an electronic telephone, and a DSS console can be assigned
to a digital telephone. DDSS is supported by PCTU3 only, DSS is supported by PCTU I, PCTUZ, PCTU3,
and PCTUS.
3. Refer to Program 03, Flexible PCB Slot Assignments, for the PCB slots of PEKUs and PDKUs configured
to support consoles.
4. The system automatically assigns the console supported by the PEKU or PDKU in the lowest-number PCB
slot to be console number 1. See Note 7.
5. The system automatically assigns the telephone connected to the 1st station pot? on a console PDKU or
PEKU to be attendant number 1. See Note 7.
6. If more than one console is associated with one attendant telephone, then specify the same number
attendant telephone for all consoles associated with it.
7. Shaded information is for configuration purposes only.
8. Initialized data assigns console #l to attendant telephone #I; console #2 to attendant telephone #2;
console #3 to attendant telephone #3, and console #4 to attendant telephone #4.
9. Console #4 is not available with PCTUS PCB.
I
2-65