Toshiba STRATA DK24 Manual page 467

ACCOUNT CODE CALLS
(continued)
OVERRIDE
(continued)
4A) Hang up or resume talking.
. . . or. . .
4B) If voluntary account codes are verified (Release 3):
l
If a valid code is dialed, you will hear one confirmation
burst tone. Hang up or resume talking.
l
If an invalid code is dialed, you will hear two confirma-
tion burst tones. Repeat steps 1 N 3 to enter another
code, or hang up, or resume talking.
MESSAGE SENDING
TO SET MESSAGE WAITING TO AN ELECTRONIC OR
DIGITAL TELEPHONE
1) Lift the handset.
l
You will hear intercom dial tone.
2) Dial the station number.
3) Dial 0.
4) Hang up handset.
TO CANCEL MESSAGE WAITING SET AT AN ELECTRONIC
OR DIGITAL TELEPHONE
1) Lift the handset.
l
You will hear intercom dial tone.
2) Dial the station number.
3) Dial m 0.
4) Hang up the handset.
OVERRIDE
After reaching a busy station (fast busy-two tones per second),
you may signal that station that a call is waiting.
TO INITIATE A BUSY OVERRIDE SIGNAL
1) Dial 1.
l
A tone signal will be heard at the busy station.
2) After reaching a DND station (very fast busy-four tones
per second), you may signal that station that a call is
waiting.
12
TO OVERRIDE DND (Programmable Option)
1) Dial B.
l
A tone signal will be heard at the DND station indicat-
ing an override call.
2) After reaching a busy station, Executive Override allows
you to enter an established conversation.
TO INITIATE EXECUTIVE OVERRIDE (Programmable Option)
Dial 1.
l
A tone signal will be heard prior to entering the
conversation.
PAGING
TO PAGE
1) Lift the handset.
2) Listen for intercom dial tone and dial the following:
iI= All Call (all electronic and digital telephones)
10 = Group #l
B B = Group #2
[I = Group #3
1 i = Group #4
11 w B I= External Page Zones
Bi = All Call (with External Page).*
3) Make your announcement in a normal voice level and
repeat it.
4) Hang up when you have completed your announcement.
*Programmable option; also see call pickup.
13