Toshiba STRATA DK24 Manual page 560

SUMMARY OF LCD FUNCTIONS
(continued)
SUMMARY OF LCD FUNCTIONS
(continued)
I
NO. NNN
NN BUSY OVR
I
V) Overrides
1) Busy Override
2) Executive Override
I
NO. NNN
NNNEXECOVRD
I
When another station off-hook call an-
nounces to your station, your LCD dis-
plays the number of that station.
When you activate the override feature
after calling a busy station, the station
number and the feature are displayed.
Your LCD telephone displays the num-
ber of a station initiating override when
you are on the telephone. The number
will remain displayed until override is
disconnected.
When you initiate executive override,
your LCD telephone displays the num-
ber of the station that is overridden. The
station that receives the override dis-
plays your station number. The number
will remain displayed until the call is
ended.
3) Do Not Disturb (DND) Override
1 I
I
NO. NNN
INT NN??DND
I
The station you have called is in the do
not disturb mode.
When you initiate do not disturb override,
the station number you have overridden
is displayed.
When another station overrides do not
disturb at your station, its number is
displayed. (The display remains until the
end of override.)
4) Privacy Override
When a station presses a busy line but-
ton to enter an existing conversation:
The station that initiates the override
displays the CO line identification on the
LCD. The overridden station's LCD dis-
plays initiating station's number. (The
display remains until the end of the call.)
W) Recalling Station
When a transferred call goes unan-
swered, it will recall to the station that
transferred it. The display shows the CO
line number and the station number to
which it was originally transferred.
X) Speed Dial Memo
When using Speed Dial Memo (mode 8),
the name and number are displayed.
TOSHIBA is the memo (up to
characters).
714 583 3700 is the number (up to
digits).
Y) Toll Restriction Override Codes
12
16
a CO line and press
i 0 to dial a complete toll
' restriction override or traveling class
code, your LCD display will prompt you
to dial a code.
Z) Two-CO Line Calls
1) Tandem
After you establish a two-CO line confer-
ence call and then release. ,N, and N,
identify the connected CO lines.
10
11