Insert Editing - JVC HR-DVS2EU Instructions Manual

56
EN

Insert Editing

Recorder
Audio/Video
signal
Another recorder
Player
DV
1
2
NUMBER "0"
1
2
NOTE:
Insert Editing is not possible with a Mini DV tape recorded in LP
mode.
Your recorder
S-video signal
VHS
1 2 3
4 5 6
3
7 8 9
4
4
0
3
VHS Insert Editing
Insert Editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
replaced with new ones, while the normal audio soundtrack
remains unchanged. If you wish to change the normal audio
track as well, use the audio dubbing function simultaneously.
Use your video recorder as the recorder.
Insert editing is not possible with a cassette recorded in EP
mode.
Source tape
Recorded tape
DV Insert Editing
(SP Mode Only)
The picture is replaced with new one, while the audio
soundtrack remains unchanged.
Use your video recorder as the recorder.
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT or S-VIDEO OUT
and AUDIO OUT connectors to your recorder's VIDEO
or S-VIDEO and AUDIO input connectors on the front
panel.
SELECT RECORDING DECK
2
Press VHS or DV.
PR
SET RECORDER'S INPUT
MODE
3
Press NUMBER key "0" and/or PR to select "F-1".
EDITING (cont.)
Before insert editing
After insert editing
When using the DV deck as the recording deck, press
← so that the video and audio signals from the
VIDEO/S-VIDEO and AUDIO L + R input connectors
can be recorded. The dubbing direction (← VHS)
indicator lights.
When using the VHS deck as the recording deck, set
"VHS F-1 INPUT" to "VIDEO" for the AUDIO/VIDEO
input connectors, or "S-VIDEO" for the AUDIO/
S-VIDEO input connectors, depending on the
connectors being used (
Normal
Audio track
Video/Hi-Fi
audio track
pg. 59).