Special Features; Remote Control Functions - JVC HR-DVS2EU Instructions Manual

42
EN
Remote
Control
Functions
LCD panel
DV
1
2
1
NUMBER "1"
4
NUMBER "4"
7
1
2
VHS
NUMBER "3"
2 3
5 6
3
8 9
4
4
0
OK
3

SPECIAL FEATURES

Remote A/B/C/D Code
Switching
The remote control is capable of controlling four JVC video
recorders independently. Each of recorders can respond to one
of four codes (A, B, C or D). The remote control is preset to
send A code signals because your video recorder is initially set
to respond to A code signals. You can easily modify your video
recorder to respond to B, C or D code signals.
On Remote Control
DISPLAY CODE
1
Hold down VHS or DV on the remote control over 2
seconds. The code currently set blinks on the LCD
panel.
CHANGE REMOTE
CONTROL'S CODE
2
Press the NUMBER key "1" for A , "2" for B , "3" for C, or
"4" for D.
SET REMOTE CONTROL'S
CODE
3
Press OK to set the code.
On Recorder
DISPLAY CODE
1
Press PLAY on the recorder over 5 seconds while the
recorder is turned off. The code currently set appears
on the front display panel.
If the code displayed on the front display panel is
different from the code set on the remote control, go
to step 2.
CHANGE RECORDER'S
CODE
2
Press any key on the remote control. The code currently
set on the remote control will be applied to the
recorder.
NOTE:
During Power Save, it is impossible to change the remote
control's code.