JVC HR-DVS2EU Instructions Manual page 59

VHS F-1 INPUT Setting
Set "VHS F-1 INPUT" to the appropriate mode depending on the connector (VIDEO or S-VIDEO input connector) being used on
1
the front panel.
2 Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or
#
3
.
Press %fi to move the highlight bar (pointer) to "VHS F-1 INPUT".
4
#
Press OK or to select "VIDEO" or "S-VIDEO".
a–VIDEO : If a connected device's output is compatible only with regular video
signals, set "VHS F-1 INPUT" to "VIDEO".
b–S-VIDEO : If a connected device's output is compatible with Y/C signals, set
"VHS F-1 INPUT" to "S-VIDEO". This setting will let you take advantage of
higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin
5
SCART cable that is compatible with the Y/C signal.)
Press MENU to return to normal screen.
S-VHS/AUDIO OUT Setting
Set "S-VHS/AUDIO OUT" to the appropriate mode depending on the selection of the playing deck (VHS or DV) for editing.
1
2
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
3
Press %fi to move the highlight bar (pointer) to "S-VHS/AUDIO OUT".
4
#
Press OK or to select "AUTO", "VHS" or "DV".
a–AUTO : The recorder outputs the signals from the deck being used automatically.
The on-screen display is also output.
b–VHS : The recorder outputs only the signals from the VHS deck. The on-screen
display is not output.
c–DV : The recorder outputs only the signals from the DV deck. The on-screen dis-
5
play is not output.
Press MENU to return to normal screen.
OUTPUT/INPUT SET
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
VHS
F-1 INPUT
[5∞] =
[MENU] : EXIT
#
.
MODE SET
S-VHS/AUDIO OUT
AUO. S. D.
AUTO TIMER
DIRECT REC
POWER SAVE
[5∞] =
[MENU] : EXIT
59
EN
VIDEO
VIDEO
A/V
VIDEO
AUTO
ON
OFF
ON
OFF