System Connections; Connection To A Satellite Receiver - JVC HR-DVS2EU Instructions Manual

60
EN
Connection To
A Satellite
Receiver
Back of TV
ANTENNA
ANTENNE
IN
ENTREE
OUT
SORTIE
IMPORTANT
When you set "L-2 SELECT" to "SAT" (
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.
When the recorder is turned off, only a composite signal is output from the recorder to TV.
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.
Aerial
connector
ANT. IN
ANT. OUT
21-pin AV input
connector (SCART)
AV1 (L-1)
IN/OUT ENTREE/SORTIE
SAT CONTROL
CONTROLEUR SAT
IN/DECODER
AV2 (L-2)
ENTREE/DECODEUR
pg. 58), it is possible to view a satellite broadcast with the TV set to its AV mode even
Simple Connections
This is an example of simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the AV2 (L-2) IN/DECODER
connector, then connect the AV1 (L-1) IN/OUT connector to the
TV's connector.
NOTES:
Set "L-2 SELECT" to "A/V". (
To record a programme via the satellite receiver, select L-2
mode by pressing NUMBER keys and/or PR so that
"L-2" appears on the display panel.
For details, refer to the instruction manual for the satellite
receiver.
Aerial
TV Aerial
cable
OUT
S
SORTIE
(DV/VHS)
AUDIO
(DV/VHS)
L
OUT
SORTIE
R

SYSTEM CONNECTIONS

pg. 58)
Outdoor Unit
Satellite Cable
Satellite Receiver Unit
TV VCR
Mains outlet
Back of Recorder
DECODER