Tape Dubbing - JVC HR-DVS2EU Instructions Manual

46
EN

Tape Dubbing

DV
1
2
1
4
7
1
2
VHS
2 3
5 6
3
8 9
4
4
SP/LP/EP
0
3
Dubbing An Entire Cassette
Because this recorder includes both a VHS deck and a DV
deck, you can easily use it for dubbing without connecting any
other equipment.
LOAD CASSETTES
1
Insert a VHS (or S-VHS) cassette and a Mini DV
cassette.
SELECT DUBBING
DIRECTION
2
Press → when you want playback on the DV deck and
recording on the VHS deck. The dubbing direction
(DV →) indicator lights.
OR
Press ← when you want playback on the VHS deck and
recording on the DV deck. The dubbing direction
(← VHS) indicator lights.
SET TAPE SPEED
3
Press VHS or DV for the recording deck, then press
SP/LP/EP ( ).
"DV → VHS" or "DV ← VHS" appears on the TV
G
screen if "O.S.D." is set to "ON". (
START DUBBING
4
Press DUB for two seconds.
Dubbing from DV to VHS:
DV play indicator (
light.
Dubbing from VHS to DV:
VHS play indicator (
light.
G If the tapes have not been rewound, both decks
rewind automatically. The recording deck goes into
Record-Pause mode, and the playback deck goes into
Pause mode.
When both decks have finished rewinding, dubbing
begins automatically.
After dubbing is completed, the decks rewind both
tapes automatically and eject them. The recorder
then shuts off.
NOTES:
If you set the dubbing direction incorrectly, you could erase
G
an important recording that you wanted to copy. We
recommend conducting a test with unimportant cassettes first.
On the cassette that you are playing (i.e., recording from) we
G
recommend either setting the erase protection switch to
"SAVE" (if the cassette is a Mini DV cassette), or breaking off
the record safety tab (if the cassette is a VHS cassette).
It is impossible to view a satellite broadcast or a scrambled
G
broadcast when the recorder is in the dubbing mode.
EDITING (cont.)
pg. 11)
#
) and VHS record indicator ( )
#
) and DV record indicator ( )